- ❤HIGH QUALITY & POWER ADAPTER : CE Approval acquired & Safety Test passed; POWER by DC 12V ADAPTER, highly recommended for beauty, health care and interior humidifying.
- ❤COOL MIST: It is comes out COOL mist/steam, COOL mist comes on instantly after it is turned on. No more waiting.
- ❤STEP 1: Cleaning accessories before first use, you can clean them with warm water(the Temperature can't beyond 70 degrees) or the Medical alcohol.
- ❤STEP 2: Adding water to water vessel, Fill water to slightly above white ring so it last for the full treatment time for 10 minutes;-- Then Fill to midline cup (50%),you can use liquid medication, distilled water,or a combination of both.
- ❤STEP 3:Putting medicine cup into water vessel;-- Turning it on. Red = high mode, Red/Green = low mode;-- Then you can use it with the mask or the mouth piece.
It's an ideal Steam Inhaler for the beauty & health.
Ultrasonic frequency: 2.4Mhz
Output voltage: DC12V
Input voltage: 110 ~ 220V
Droplet size: 0.5 ~ 5 micron
Cup capacity: 10ml Vessel capacity: 25ml Atomization volume 0.375ml/min.: 20mins timing automatically
Atomization volume 0.35ml/min.: 10mins timing automatically
Item weight: 159g/5.6oz
Package size: 21.5*21*7.5cm/8.5*8.3*3in
Package weight: 430g/15.2oz
1.Clean all the assessories and the inhaler before first use with medical alcohol;
2.Take off the cover;
3.Add water into the inhaler vessel and medication+distilled water in to the Medicine cup; put the cup into the vessel; then put the sealing ring on the top of the vessel; last, put on the inhaler cover;
4. Turn on the High mode by pressing the ON/OFF button for 5 seconds , press the second time to adjust the inhaler to Normal mode, Inhaler will automatically off after one treament; High mode means more atomization, and normal mode means less atomization.
5.Add the water vessel with room temperature water and use water with temperature at about 40 degree in cold weather.
6. This item is not chargeable, it is plug and play.
Note: If only the red light blinks,or completely no steam comes out, please make sure to check if there are enough water or liquid in both the water vessel and the medicine cup. Sometime the steps missed, will cause the trouble. Contact our customer service if helps needed for using this item!
1 x Steam Inhaler/1 x DC 12V Transformer/2 x Mask (big & small)/2 x Rodent spigot/5 x cup/1 x User manual